Changsha Taihe Electronic Equipment Co., Ltd.
Add to Cart
0 ～200MPa PPM-T230D Water Treatment Process Control Pressure Transmitter
Product Introduction:
PPM-T230D pressure transmitter adopts integrated design, laser welding seal, no rubber seal ring, long-term pressure fatigue shock before leaving the factory, long-term high and low temperature cycle aging and temperature compensation, anti-RF and electromagnetic interference, anti-high frequency high-voltage shock To ensure product stability and reliability. This series supports various parameter customization services.
Applications :
Dynamic and static pressure measurement of pneumatic equipment and hydraulic test benches
Well logging, platform on the well, high pressure pump, pressure test pump, blowout preventer, etc.
Hydraulic pump station, die-casting machine, bearing lubricant
Technical Parameters :
| Measured medium : | Non-corrosive gas and liquid to 316 stainless steel |
| Pressure Type : | Absolute Pressure, Sealed Reference Pressure, Ventilator Pressure |
| Pressure Range: | 0 ～ 6MPa… 10MPa… 200MPa |
| Power supply : | 24VDC (10-32VDC) |
| Output signal : | 4-20mA, 1-5VDC, 0-5VDC, 0-10VDC, 0.5-4.5 VDC selectable |
| Mounting thread : | M20 × 1.5, M14 × 1.5, G1 / 4, 1 / 4NPT, 1 / 2NPT |
| Electrical interface | Hirschmann connector, aerial plug, direct outlet |
| Repeatability : | 0.1% FS |
| Non-linear : | 0.2% FS, 0.1% FS, 0.05% FS optional |
| Comprehensive accuracy: | 0.2% FS, 0.5% FS optional |
| Long-term stability | 0.2% FS / year (typical value) |
| Working medium temperature : | -40 ～ + 85 ℃ |
| Working environment temperature : | -20 ～ + 75 ℃ |
Definition of wiring:
| Hirschmann Connector | |||
| 2-wire system | 3-wire system | ||
 | Power supply | 1 | 1 |
| Negative power | 2 | 2 | |
| Signal positive | 一 | 3 | |
| Direct outgoing | |||
| 2-wire system | 3-wire system | ||
| Power supply | red | red |
| Negative power | black | black | |
| Signal positive | 一 | green | |
Dimensions in mm :